2011

5 Right-click to create the link.
6 (Optional) Link any other text entities to the proper attribute.
7 Right-click to exit the Linking command. Right-click a few times before
exiting, if necessary.
Add geometry and wire connections
1 Click Conversion Tools tab ➤ Tools panel ➤ Add Wire Connections.
2 Select the block to tie the wire connections to.
3 Select the endpoint of the wire or a position on a symbol. Press Shift,
right-click, and select Endpoint from the menu to select the endpoint
easily.
4 After you define the wire connection attribute, you can select the terminal
text if the drawing contains the value. If not, continue with the next wire
connection attribute.
5 Right-click to apply the selection.
Visual indicators (x) appear where the wire connection attributes were
already applied.
6 Repeat the selection for the other endpoint.
7 Right-click to exit the command. Right-click a few times before exiting,
if necessary.
8 Click Conversion Tools tab ➤ Tools panel ➤ Add Geometry.
9 Select the block to add the geometry to.
10 Pick or window select the geometry to associate to the template block
file.
11 Right-click to apply the selection.
12 Specify the insertion point.
Special explode
Use tagging and linking tools | 1653