2011

Table Of Contents
Adds wires from additional devices.Pick Devices
Defines the spares to include in the conduit.Spares
Sorts the list of conduit wires using an alphanumeric sort.Sort
Report/Print
Opens the Report Generator dialog box for running a Conduit marker report.
Conduit marker setup
The conduit marker is a block inserted to add intelligence to a line or pline
representing a conduit on a layout drawing. There are four blocks, called
WWAYT, WWAYB, WWAYL, and WWAYR. The blocks are identical except
for the insert point, T=top, B=bottom, L=left, R=right. The program picks
which block based on the leader drawn.
Ribbon: Panel tab Conduit Tools panel Conduit Markers drop-down
Insert Marker.
Toolbar: Conduit Markers
Menu: Panel Layout Conduit Marker Tools Conduit Marker (Pick)
Command entry: AECONDUITMARKER
Type S and press Enter.
Specifies the marker tag. Each conduit marker receives a unique tag.
Enter the text for the next tag. Each successive tag is incremented
from the previous tag.
Conduit tag
Defines the scale to insert the conduit marker block.Scale
Add spare wires
Defines the spare wires to include in your conduit.
Ribbon: Panel tab Conduit Tools panel Conduit Markers drop-down
Insert Marker.
Overview of conduit tools | 1631