2011

Table Of Contents
Command entry: AECONDUITMARKER
Select the line that represents the conduit, click to define the leader, and then
select layout devices or branching conduit markers and press Enter.
Conduit Marker (From/To List)
Ribbon: Panel tab Conduit Tools panel Conduit Markers drop-down
Insert From List.
Toolbar: Conduit Markers
Menu: Panel Layout Conduit Marker Tools Conduit Marker
(From/To List)
Command entry: AECONDUITMARKERLIST
Select the line that represents the conduit, click to define the leader.
Edit Conduit Marker
Ribbon: Panel tab Conduit Tools panel Edit Marker.
Toolbar: Conduit Markers
Menu: Panel Layout Conduit Marker Tools Edit Conduit Marker
Command entry: AEEDITCONDUITMARKER
Select an existing conduit marker.
Conduit Tag
AutoCAD Electrical selects a default conduit tag which can be overridden at
any time. Click Drawing to use a tag used for similar conduits in the active
drawing or click Project to use a tag used for similar conduits in the project.
See
Conduit Marker Setup on page 1631 to define the default format for the
conduit tags.
1628 | Chapter 20 Conduit Tools