2011

Table Of Contents
Draws a rectangle, circle, or octagon to represent
the terminal strip. Text and hidden information are
inserted when drawn.
Draw shapes
Select a terminal strip from the drawing.Pick "just like" footprint
Pick a terminal strip from a list of .DWG files on disk.Browse
Pick a non-AutoCAD Electrical block on the drawing
to be instantly changed into a smart AutoCAD Elec-
trical block.
Pick
Insert/edit panel level assignment: terminal strip
Insert/edit panel level assignment: terminal strip
Use this tool to view, assign, or edit 3-digit level codes on panel terminal strip
representations. This coding, when present, influences the way that AutoCAD
Electrical calculates the wire connection from/to sequence. As it processes the
schematic component representations and wiring, it checks for any coding
found on the panel footprint and panel terminal strip representations. If
present, it adjusts the from/to sequencing accordingly.
This panel terminal strip coding can trigger supplementary or "shipping split"
terminal strip references, not necessarily shown on the schematics, to be
inserted into the schematic from/to wiring calculation. Specific wire connection
sequencing defined directly on the schematics using the Define Wire Sequence
command override this Panel level/sequencing assignment mechanism.
Toolbar: Panel Level/Sequencing
Menu: Panel Layout Panel Level/Sequencing Insert/Edit Panel
Level Assignment
Command entry: AEPANELLEVEL
Select an existing panel terminal strip representation.
Default
Displays a dialog box to set the drawing-wide default assignments for each of
the four level categories. Values entered here become the default level
Insert/edit panel level assignment: terminal strip | 1615