2011

Table Of Contents
Show sequencing assignments
Show sequencing assignments
You can select a supplementary terminal strip to display its defined leveling
assignments to the command line. You can also select two panel footprint
symbols to display wire connection information in a visual path on the screen.
Show terminal strip sequencing assignments
1 Enter AESHOWTERMINALSEQ at the command prompt.
2 Select a supplementary terminal strip.
The leveling assignments for the selected terminal strip display in the
command line. You see something like: LEV4-LEV1=001-001-001-001.
3 Press ESC to exit the command.
Show footprint sequencing assignments
1 Enter AESHOWFPSEQUENCE at the command prompt.
2 Select footprint to show the routing path from.
3 Select the device to show the path to.
The wire connection information for the selected footprints display on
the screen.
4 Press ESC to exit the command.
Swap terminal strip wire text
Swap terminal strip wire text
Swaps wire annotation text from one side of the terminal strip to the other.
The Internal and External default definition applies when the terminal strip
is initially placed.
1 Enter AEPANELTERMINALSWAPTEXT at the command prompt.
2 Select the wire annotation text to swap.
The wire annotation is flipped to the other side of the selected terminal
strip.
3 Press ESC to exit the command.
Show sequencing assignments | 1611