2011

Select project drawings and perform any of the following:
■ Erase, reset, fix, or unfix wire numbers.
■ Fix or unfix component tags.
■ Fix or unfix item numbers.
■ Clear signal cross-referencing.
■ Run a user-specified script file.
■ Change attribute text size or style.
■ Import wire types from another drawing or drawing template.
You can have multiple drawings open at any time. However, to maximize
performance and memory usage, minimize the number of open drawings
when running project-wide commands.
Wire Numbers
Select to keep wire numbers the same, erase specified wire numbers, reset
specified wire numbers, or set wire numbers to fixed or normal.
Signal Arrow Cross-reference text
Select to maintain the signal arrow cross-reference text or to remove all signal
arrow cross-reference text across the current project.
Parent Component Tags: Fix/Unfix
Select to maintain the component tags or to set all parent component tags to
fixed or normal across the current project.
Item Numbers: Fix/Unfix
Select to maintain the item numbers or to set all item numbers to fixed or
normal across the current project. If you run
Resequence Item Numbers on
page 1602 later on, fixed item numbers do not change.
Change Attribute
Click Setup to select the attributes to change, and then
enter the height and width definitions for the selected at-
tributes.
Change Attribute Size
Fixing item numbers | 1607