2011

■ Assigns the same item number to repeated part numbers. This is done on
a drawing basis or project basis depending on the
Item Numbering Setup
on page 211.
■ Fixed item numbers do not change. If multiple components have the same
item number but only one is marked fixed, the item number is not
resequenced.
■ Ability to process components based on selected manufacturers.
■ Ability to control the process order based on manufacturer.
Resequence item numbers
1 Click Panel tab ➤ Edit Footprints panel ➤ Resequence Item Numbers.
2 Specify the beginning number to use.
3 If you want to assign item numbers only to components that do not
already have one, check Process blank items only.
4 Specify to process the data for the current drawing or the entire project.
If you select Project, you are able to select which drawings from within
the project. If you select Current Drawing only, AutoCAD Electrical does
not check other drawings for existing item number assignments.
5 If you want to process only the components with certain manufacturer
values:
■ Uncheck Process all. The list displays containing all manufacturers
used in the project.
■ Select which manufacturers to process using the Add and Remove
buttons. Select a manufacturer or group of manufacturers and click
Add or Remove.
■ Change the order of processing using the Move Up and Move Down
buttons. Select a manufacturer or group of manufacturers and click
Move Up or Move Down. The default order is alphabetical.
6 Click OK.
7 If Project is selected, select the drawings to process.
Resequencing item numbers | 1603