2011

Table Of Contents
NOTE You can also create a project by right-clicking at the bottom of the
tree inside the Project Manager and selecting New Project or by clicking the
arrow on the Project Selection menu and selecting New Project.
3 In the Create New Project dialog box, enter the name for the new project.
The .WDP extension is automatically added to the filename.
4 Select or create the directory where you want to save the project.
5 (Optional) Specify an existing project file (WDP) to use. Use the default
or click Browse to select a previously defined project definition file.
6 (Optional) Click Descriptions to enter descriptions for the project. You
can enter up to 12 description lines per page. You can also select the
check boxes for the information to include in reports generated for the
project.
7 (Optional) Click OK-Properties to modify your project default settings
for project settings, components, wire numbering, cross-references, styles,
and drawing formats. All information defined in these tabs is saved to
the project definition file as project and drawing defaults.
8 Click OK.
Add a new drawing to the current project
1 Click Project tab Project Tools panel Manager.
2 On the Project Manager, click the New Drawing button.
3
Create a new drawing on page 167 and click OK.
4 In the Project Manager, right-click the project name and select Add Active
Drawing. The drawing is added to the end of the existing list.
Add existing drawings to the current project
1 Click Project tab Project Tools panel Manager.
Overview of projects | 139