2011

■ Executes a command
■ Displays a submenu
NOTE When you move the cursor over an icon, the icon name
and block/circuit/command name display as tooltip information.
Displays the last components inserted during the current editing
session; the most recently used icon displays in the top. The list
Recently Used
box follows the view options setting in the symbol preview win-
dow (icon, icon with text or list view) and the total number of
icons displayed depends on the value specified in the Display edit
box.
Specifies the number of icons to display in the Recently Used list
box. Enter integer numbers only; the default value is 10.
Display
Turns off the Insert/Edit Component dialog box when inserting
symbols onto the drawing. To add component detail later, click
the Edit Component tool, and select the component to edit.
No edit dialog box
Inserts the component, untagged (example: without assigning
a unique Component Tag). The untagged value that displays is
No tag
the TAG1/TAG2 default value of the component. To add compon-
ent detail later, click the Edit Component tool, and select the
component to edit.
Indicates to display the previously used menu each time you open
the Insert Component dialog box. For example, if you insert a
Always display previously used
menu
push button from the Push Buttons menu, the next time you
open the Insert Component dialog box the Push Button menu
displays by default.
Specifies the component block insertion scale. This defaults to
the value set in the Panel Drawing Configuration dialog box.
Scale schematic
Once set, this value is remembered until reset or until the drawing
editing session ends.
Specifies the footprint insertion scale. This defaults to the value
set in the Panel Drawing Configuration dialog box. Once set, this
Scale panel
value is remembered until reset or until the drawing editing ses-
sion ends.
1550 | Chapter 19 Panel Layout