2011

5 In the Select Drawings to Process dialog box, select the drawing that has
the schematic symbol you inserted. Click Process, and then click OK.
This extracts a list of all schematic devices found in the drawing and
displays them in a dialog box for selection.
6 In the Schematic Components dialog box, select the schematic component
you inserted and click Insert.
■ AutoCAD Electrical takes the manufacturer attribute value (MFG) and
finds a table in the footprint_lookup.mdb file with this name.
■ AutoCAD Electrical queries this specific vendor table using the catalog
attribute value (CAT) of the selected entry and returns the block name
from the matched record.
■ The Insert Footprint command starts and prompts for the insertion
point for the footprint block.
7 Pick the insertion point and orientation.
■ The values of the schematic symbol are copied to the footprint
representation.
■ The selected item is checked off the list in the Schematic Components
dialog box (an "x" appears in the left-hand column) to track what has
been inserted.
8 In the Panel Layout - Component Insert/Edit dialog box, click OK.
9 In the Schematic Components dialog box, click Close.
Schematic components list -> panel layout insert
Inserts and annotates a panel footprint by referencing the schematic
component list in the project.
Ribbon: Panel tab ➤ Insert Component Footprints panel ➤ Insert
Footprints drop-down ➤ Schematic List.
Toolbar: Component Footprint
Menu: Panel Layout ➤ Insert Footprint (Schematic List)
Command entry: AEFOOTPRINTSCH
Insert panel footprints from a schematic list | 1537