2011

1 Click Schematic tab ➤ Insert Wires/Wire Numbers panel ➤ Insert Wire
Numbers drop-down ➤ Wire Numbers.
2 In the Wire Tagging dialog box, select Insert as Fixed if it is not already
selected.
3 Click Project-wide, Drawing-wide, or Pick Individual Wires depending
on which method you want to use to update your wire numbers.
Manually inserting wire numbers:
1 Click Schematic tab ➤ Edit Wires/Wire Numbers panel ➤ Modify Wire
Numbers drop-down ➤ Edit Wire Number.
2 Click a wire that does not currently have a wire number assigned to it.
3 In the Insert wire number dialog box, select Make it Fixed to force the
wire number to a fixed state.
4 Click OK.
Inserting wire numbers using project-wide utilities:
1 Click Project tab ➤ Project Tools panel ➤ Utilities.
2 In the Project-Wide Utilities dialog box, select Set all wire numbers to
fixed.
3 Click OK. All wire numbers in the project are now flagged as fixed.
Autodesk Inventor Professional export
Creates an XML file, and exports component and wiring data for Autodesk
Inventor Professional into it.
Ribbon: Import/Export Data tab ➤ Export panel ➤ Inventor.
Set up for export to Autodesk Inventor Professional Cable & Harness | 1521