2011

Table Of Contents
Breaks
Special breaks: Specifies the value that controls the section break. The
drop-down list displays the report-specific content to apply to the special
break.
Add Special break values to header: Adds the special break value to the
page header. For example, if you select a special break of
Installation/Location, the values provided for these devices in the schematic
are displayed in the report section header.
Format File
Format files define specific criteria applied to the report before generating the
report to screen, printer, file, or automatic generation. The format files are
saved to the 'Documents and Settings\{user name}' subdirectory or 'Users\{user
name}' on a Windows Vista or Windows 7 installation.
Open Format File: Selects format files to edit. The Report Format Settings
File Selection dialog box opens and displays a list of format files (.set) in
the user subdirectory. Select a file to edit from the list and click OK.
NOTE You cannot open format files created before AutoCAD Electrical 2005
for this report.
Save Format File: Saves a format file on the hard disk for later retrieval and
usage when generating reports.
Save As Format File: Saves a format file that you opened and modified with
a different name.
Report format file setup - schematic component
wire list
Ribbon: Reports tab Miscellaneous panel Report Format Setup.
Toolbar: Schematic Reports
Menu: Projects Reports Report Format File Setup
Command entry: AEFORMATFILE
Overview of format files | 1469