2011

to a text report file, a comma-delimited file to import into a spreadsheet or
database program, or insert it on to a drawing in table format.
Displays the “from” (left-hand list) and “to” location
codes (right-hand list) found on the drawings.
Location codes
Clicking a location code moves the selected code
from these lists to the Report From/To list in the
center of the dialog box.
Displays the combination of location codes you
selected from the Location Code lists. This is used
to generate the Wire From/To report.
Report From/To
Buttons
■ All >> or All <<: Adds or removes all the location
codes from the Report From/To list depending
on which side of the dialog box the button is
located.
■ << or> > : Removes the selected location code
from the Report From/To list.
Displays the Select Multiple From/To Location
Combinations for Report dialog box. Each location
Multiple Combinations
code in the “From” side is linked to each location
code in the “To” side of the report. For example,
if you select MACHINE (from) and FLOOR (to) in
addition to MCAB5 (from) and JBOX1 (to) the fol-
lowing combinations are created:
MACHINE -> FLOOR
MACHINE -> JBOX1
MCAB5 -> FLOOR
MCAB5 -> JBOX1
Each of the combinations is processed and com-
bined into a single report. Adjust the list as needed
(for example, you can select to remove highlighted
combinations or keep only those combinations you
highlight in the list) and click OK.
Includes reversed wire connections in the report. If
unselected, some Wire From/To combinations may
be excluded due to wire sequencing.
Include reverse sequences
1426 | Chapter 18 Reports