2011

Table Of Contents
Category
By default, the report lists schematic components. Select a different Category
to run the report for one-line, one-line bus-tap, hydraulic, pneumatic, P&ID,
or user-defined components. These components are each identified by a unique
WDTYPE attribute on page 325 value.
Include options
Specifies to include cable information in the report.Include Cables
Specifies to include connector information in the
report.
Include Connectors
Specifies to include jumper information in the re-
port.
Include Jumpers
Specifies to cable, connector, and jumper informa-
tion in the report.
All the above
Lists each individual Tag-ID and terminal number
combination if selected. If unselected (default), the
List terminal numbers
terminals are combined on the same Tag-ID strip
into a single entry with a quantity.
Display option
Identical component or component/assemblies are
tallied and reported as single line items (example:
Normal Tallied Format
Red push-button operator 800EP-F4 with 800E-A3L
latch and two 800E-3X10 N.O. contact blocks).
Identical component or component/assemblies
with the same installation/location codes are tallied
and reported as single line items.
Normal Tallied Format (Group by Installa-
tion/Location)
Each part becomes its own line item (example: no
longer any sub-assembly items) and each is tallied
Display in Tallied Purchase List Format
across all component types. For example, all 800E-
3X10 N.O. contact blocks for all components are
reported as a single line item.
1404 | Chapter 18 Reports