2011

Table Of Contents
Select PLC Modules Used So Far from the report list. Run the report and click
Change Report Format on the Report Generator dialog box.
Lists the available fields for formatting the report (including
user-defined attributes). Select a field from the list to
transfer it into the Fields to Report list.
Available Fields
Lists the fields to display in the report.Fields to Report
Removes the selected field or all fields from the Fields to
Report list.
Remove/Remove All
Moves the selected field up one spot in the Fields to Report
list.
Move Up
Moves the selected field down one spot in the Fields to
Report list.
Move Down
Specifies the vertical and horizontal justification (Top Left,
Middle Center, Bottom Right) of any column and the
Change field name/justification
column label (default is Top Left). The vertical portion of
the justification (Top, Middle, Bottom) is only used for the
Put on Drawing report feature. For example, if you select
"Top Right" the report is right-justified during the display,
printing and when saved to a file (the "top" portion is ig-
nored). If you put the report on the drawing, the report
justification is top right.
Available Fields
PLC beginning addressADDR_BEG
PLC ending addressADDR_END
PLC tag valueTAG
Manufacturer or vendor name (i.e. Siemens)MFG
Catalog part number assignmentCAT
Optional assembly code value used in catalog lookup query to get
part number groups
ASSYCODE
Generate reports | 1389