2011

User post file name for .lsp and .dclPanel Report
LEVBLNKMissing Level/Sequence Assignments
Display Setup
(for Wire Label report only) Sets up options for label quantity, horizontal or
vertical arrangement of data, display selection of wire labels and cable labels,
and total number of columns for displaying the report.
Displays the wire label for all wires in the specified
format.
Display Wire Label
Displays the cable labels in the specified format.Display Cable Label
Arranges the wire label horizontally or vertically
across the columns.
Label Arrangement
Specifies the quantity of wire labels or cable labels.
Wire labels are generated for every wire connection
while cable labels are generated once for every cable.
Label Quantity per Connection
Arranges the wire labels in the specified number of
columns.
Number of Columns to Display
Change Report Format
Changes what data fields are reported and the order in which they appear.
(for Wire Label report only) There are two categories that you can change the
report format for: wire label or cable label. Once you modify the report format,
you can save it for future use. The wire and cable label formats are stored in
the same file.
Surf
Surfs to the offending symbols. This is generally used for the Missing
Level/Sequence Assignments and Wire Annotation Exception reports.
Edit Mode/Edit Wire Label/Edit Cable Label
Modifies the report before you insert it to your drawing. You can move data
up or down in the report, add lines from a catalog, and delete lines.
Generate reports | 1329