2011

Breaks
Controls how the report breaks across multiple pages. Only one check box
can be selected at a time. Specify whether to add page breaks or special breaks
to the report.
Breaks the report at the 58th line.Add page breaks
Specifies the value that controls the section break.
You can break the report into sections based on the
Special breaks
special break selected from the list. The list displays
the report-specific content to apply to the special
break. For example, selecting Wire Layer displays the
wire label records in different sections based on the
wire layer data.
Adds the special break value to the header. For ex-
ample, if you select a special break of Installation/Loc-
Add special break values to header
ation, the values provided for these devices in the
schematic are displayed in the report section header.
Suppress subcatalog entries
(for Component Report only) The component report displays all components
and their related catalog numbers. A component can have one or many catalog
numbers associated to it based upon whether or it is set up with subcatalog
numbers or if you choose to assign multiple BOM items to the component.
This removes the extra catalog numbers from the report and displays only the
primary catalog number from the Insert/Edit Component dialog box.
Pin chart
(for Connector Plug Report only)
The Connector Plug report displays the wiring information associated to a
pin symbol in the form of a chart based upon a similar Component tag.
Selecting "On" displays another dialog box to set up the chart and yields just
the specified information into the report generator for printing, saving to a
file, or placing in a table on the drawing.
Displays all component tag names in the report.Tag Name
Eliminates any duplicate pin numbers for the selected
plug from the report.
Remove duplicated pin numbers
Generate reports | 1325