2011

New Lines
Indicates to add new lines above or below the selected line, or as a sub-assembly
of the selected line.
■ Add from Catalog: Opens a subdialog box for selecting which catalog
lookup table to open. From this catalog table, you can select a part to add
to the report.
■ Add New: Creates a new report line entry. Enter the values in the input
boxes and click OK.
■ Add Copy: Creates a copy of the selected line entry. Modify the values in
the input boxes and click OK.
Edit or Delete lines
■ Edit: Opens a subdialog box for editing the values for the selected line.
■ Delete: Removes the selected line from the report.
If you do not select all of the lines that make up a single entry, AutoCAD
Electrical automatically deletes all the report lines that make up that entire
entry. However, if the report contains sub-assembly items, they are not
deleted when the main entry is deleted.
Re-order lines
Re-orders the lines with the Sort, Move Up, Move Down, Move to Top, and
Move to Bottom buttons.
■ Move Up: Moves the currently selected line(s) up one place in the report.
■ Move Down: Moves the currently selected line(s) down one place in the
report.
■ Move to Top: Moves the currently selected line(s) to the top of the report.
■ Move to Bottom: Moves the currently selected line(s) to the bottom of the
report.
■ Smart Swap: Swaps "*1" with "*2" values in all selected lines. For example,
in the Wire From/To report there may be field names LOC1 and LOC2.
LOC1 is the location code for the component at one end of the wire and
LOC2 is the location code for the component at the other end. This feature
swaps the values of these fields.
Report generator
Generate reports | 1323