2011

Table Of Contents
option is selected by default. If you do not want to
create the icon from the displayed image of the cur-
rent drawing, clear the check box.
NOTE This option is unavailable if you enter an im-
age file name with the syntax {slide_library or dll file
(slide or .png)}. For example, S2(pb) or S7(con-
trol_relay). It is also unavailable if the Image File edit
box contains the image file path instead of the image
file name.
(Available only when Create PNG from current screen
image is selected.) Zooms in on the current screen
Zoom
image using the AutoCAD Zoom command. Once
you exit Zoom mode and press Enter, the dialog box
redisplays so you can finish defining the new icon.
(This option appears once the Image file is specified.)
Indicates the full path of the image file location where
Location
the new images are created or the browsed images
are copied to. If you entered a file name with the
syntax {slide_library or dll file (slide or .png)} for the
image file, the path of the .dat file or the WD_SLB
folder displays here.
Block Name to Insert
Defines the symbol block that is inserted when you click the icon in the Insert
Component dialog box.
Specifies the symbol block name. The file name of the
symbol can be typed into the edit box or you can enter it
using one of the following methods:
Block Name
Browse: Finds an existing WBlocked drawing (*.dwg)
file to assign to the icon. In this case the complete path
of the drawing file is inserted in the edit box.
Pick: Selects an existing block on the current drawing
(for example, block recently created with Symbol
Builder). WBlocked version (.dwg) must exist.
Active: Inserts the active drawing as a block.
Add icon - command
Overview of the Icon Menu Wizard | 1239