2011

Table Of Contents
Saves the list of checked boxes to a file called default.wdu. The de-
fault.wdu file is saved in the user folder.
Save
Select Lines to Update (per-drawing values)
Lists drawing-specific values.
The drawing descriptions assigned in the Drawing
Properties dialog box. Up to three drawing descrip-
Drawing Description
tions can be added to a drawing. The drawing de-
scription codes DD1 (or DWGDESC), DD2 and DD3
are used for the three description lines.
The drawing section code assigned in the Drawing
Properties dialog box.
Drawing Section
The drawing subsection code assigned in the Draw-
ing Properties dialog box.
Drawing Sub-section
The file name without an extension.Filename
The file name with the appropriate extension.File/extension
The full file name and the path name where the file
is located.
Full Filename
IEC Project value of the drawing assigned in the
Drawing Properties dialog box.
P
IEC Installation value of the drawing assigned in the
Drawing Properties dialog box.
I
IEC Location value of the drawing assigned in the
Drawing Properties dialog box.
L
The %D value of the drawing settings.Drawing (%D value)
The %S value of the drawing settings.Sheet (%S value)
The maximum count of drawings in the project.Sheet maximum
Title Block Update | 1223