2011

Table Of Contents
Map a title block using the WD_TB attribute method
Create a mapping for the title block on the WD_TB attribute definition.
1 Open the title block base drawing that contains the attribute definition
objects.
IMPORTANT Do not open a drawing with the title block inserted as a block.
2 Click Project tab Other Tools panel Title Block Setup.
3 Select the title block link method: Method 2: WD_TB attrib.
An invisible attribute contained in the title block defines the attribute
mapping.
4 Click OK.
Title Block Setup reads the attribute definitions and the Title Block Setup
dialog box displays.
Title Block utility setup | 1217