2011

5 Select one or more drawing to publish to the Web.
■ Do All: Selects all drawings from the project drawing list to publish
to the web.
■ Process: Selects one or more drawings from the project drawing list
to publish to the web.
■ Reset: Moves all selected drawings back to the project drawing list.
■ Un-select: Moves one or more drawings back to the project drawing
list.
■ by Section/sub-section: Selects drawings by sections and subsections.
6 Click OK.
7 Enter a name for the project banner for the Web page.
8 Enter one or more project titles for the Web page.
9 Select the method to output drawing images to the Web page.
10 Click OK.
11 Enter an output device name.
12 Press ENTER to select no as the default when prompted to select to write
the plot to a file [Yes/No]
13 Press ENTER to select no as the default when prompted to save change
to page setup [Yes/No]
14 Press ENTER to select yes as the default when prompted proceed with
plot [Yes/No]
The progress of the plot job is displayed. When complete, you are notified
that the plot and publish job is complete.
Publish to web - temporary folder for build
Creates a Web page of selected drawings in the current project. The Web pages
and associated support files are saved in the specified folder, enabling preview,
and testing before posting to the Web. If the folder does not exist, one is
created.
Ribbon: Project tab ➤ Project Tools panel ➤ Manager.
Publish to the Web | 1205