2011

Table Of Contents
Click Project tab Other Tools panel Previous DWG.
3 Continue moving among the drawings until the file you are looking for
is opened.
4 Select Window {drawing file name} to close the drawing after you
modify anything.
You can also close a drawing file by right-clicking the file name in the
Project Manager and selecting Close from the context menu.
Plot one or more drawings
Plot one or more drawings
Batch plot the full drawing set or a subsection of the drawing set.
1 Click Project tab Project Tools panel Manager.
2 On the Project Manager, click the arrow on the Publish/Plot tool,
and select Plot Project.
3 Select one or more drawings to plot.
4 Click OK.
5 In the Batch Plotting Options and Order dialog box, select the layout tab
to plot.
6 Select the output device.
Use plot config (.pc3): Click to use an existing plotter configuration
file (.pc3), enter the file name or click Browse to select the file.
A plotter configuration file contains information such as the device
driver and model, the output port to which the device is connected,
and various device-specific settings.
Use layout tabs default: Click to use the default plotter configuration.
1190 | Chapter 15 Project-Wide Tools