2011

Table Of Contents
If you selected Plug Only or Receptacle Only for the Type, the pin
display options are show or hide only. These show or hide the pin
numbers on a single plug or receptacle symbol.
Size
Defines the outside shell size for the connector. The values in the edit boxes
build the graphical shell that represents the connector on the point to point
diagram.
Specifies the overall thickness of the receptacle side of the con-
nector. This value can be the same as the plug side.
Receptacle
When the connector is built, the receptacle side wire connection
attribute is moved from the insertion point on the divider line to
the outside line representing the receptacle. The associated ter-
minal pin attribute (TERM01_) travels half the distance as the
wire connection attribute placing itself in the middle between
the dimension on the divider line.
Specifies the overall thickness of the plug side of the connector.
This value can be the same as the receptacle side.
Plug
When the connector is built, the plug side wire connection attrib-
ute is moved from the insertion point on the divider line to the
outside line representing the plug. The associated terminal pin
attribute (TERM01_) travels half the distance as the wire connec-
tion attribute placing itself in the middle between the dimension
on the divider line.
Specifies the distance from the top or breaking point of the con-
nector to the first or next wire connection point. This feature
Top
determines where the top line is drawn relative to the first master
symbol insertion point. The distance is used for the entire con-
nector or breaking the connector.
Specifies the distance from the bottom or breaking point of the
connector to the last or previous wire connection point. This
Bottom
feature determines where the bottom line is drawn relative to the
last master symbol insertion point. The distance is used for the
entire connector or breaking the connector.
Specifies the radial dimension of the rounded portion of the plug
representation. If left blank, a radius is not created on the plug
Radius
connector. If you enter a value that exceeds the overall plug side
1172 | Chapter 14 Point-to-Point Wiring Tools