2011

Wire entering this connection
Click Internal, External, or Both to change the Connection Code (I=Internal,
E=External). The code changes the Miscellaneous value as follows:
LEFT_TERMDESC=I (for Internal), LEFT_TERMDESC=E (for External).
Wire leaving this connection
Click Internal, External, or Both to change the Connection Code (I=Internal,
E=External). The code changes the Miscellaneous value as follows:
RIGHT_TERMDESC=I (for Internal), RIGHT_TERMDESC=E (for External).
Manually define the wire number that leaves this terminal con-
nection and goes to the next. If it is the last terminal in the se-
Wire number
quence, this wire number assignment is ignored and the actual
wire number connecting the right-hand side of the symbol is
used.
Manually define the wire layer assignment. If it is the last terminal
in the sequence, this value is ignored.
Wire layer
Manually define the cable marker tag-ID. If it is the last terminal
in the sequence, this value is ignored.
Cable
Manually define a cable marker conductor color value. If it is the
last terminal in the sequence, this value is ignored.
Conductor
Delete this entry
Removes the displayed terminal sequence from the overall list and moves any
following entry positions up to fill in the gap.
Insert new before this one
Moves the current display terminal sequence down one position and creates
a new, empty entry ahead of it. There is a maximum of six total positions.
Insert new after this one
Pushes all of the following sequences down one position and creates a new,
empty entry just after the displayed entry. There is a maximum of six total
positions.
1138 | Chapter 13 Terminal Tools