2011

Table Of Contents
Manufacturer: Specifies the manufacturer
name.
Catalog: Specifies the catalog number.
Assembly: Specifies the assembly code.
Item: Specifies the item value.
Count: Specifies how the catalog data is used
in the Bill of Materials. When multiple terminals
are jumpered together, you can have a single
catalog item represent a jumper bar that spans
the selection, or single jumpers between each
terminal.
Lookup: Displays the catalog database from
which you can select the Manufacturer and
Catalog values.
Drawing: Lists the part numbers used for sim-
ilar components in the active drawing.
Project: Lists the part numbers used for similar
components in the active project.
Copy: Copies catalog values from the selected
jumper in to memory for this session of Auto-
CAD Electrical, to b paste into another jumper.
Paste: Paste the previously copied catalog val-
ues into the selected jumpers.
Clear: Clear catalog values for the selected
jumpers.
Select the jumper label, terminal strip, or a single
terminal to perform one of the following actions:
Delete
Jumper label: Deletes the jumper from all of
the terminals.
Terminal strip: Deletes the terminals in that
group from the jumper. If there are no remain-
ing terminals in the group, the jumper is de-
leted.
Single terminal: Deletes the terminal from the
jumper. If it is the last terminal to delete, the
entire jumper is deleted.
1126 | Chapter 13 Terminal Tools