2011

Table Of Contents
NOTE You can select to view a schematic terminal
or tabular view of the entire terminal strip. If you
select a terminal strip from the Schematic Terminal
list and click View, a tabular view of the terminal
strip displays, showing a layout of the connected
terminals.
By default the preview window is hidden. It can be
toggled using Show and Hide once a terminal is
viewed.
Switches the visibility of the preview window at the
bottom of the dialog box.
Hide/Show
Shows a graphical representation of the selected
terminals. You can pan the image using the left
Preview window
mouse button or the Pan tool. You can zoom the
image using the mouse wheel or the various zoom
tools.
Edit terminal jumpers
Edits the jumper information (such as adding catalog data) or deletes the
jumper.
Ribbon: Schematic tab Edit Components panel Edit
Jumper.
Menu: Components Terminals Edit Jumper
Command entry: AEJUMPER
Enter Edit (E) at the command line or first select a terminal and then enter
Edit (E).
Lists all of the jumpers (grouped by Jumper ID) at-
tached to the selected terminal.
Jumpers to Terminals
Specifies the catalog data for the jumper between
the primary terminal and the selected terminal. If
Catalog Data
the selected terminal is not jumpered these options
are disabled.
Terminal jumpers | 1125