2011

Table Of Contents
minal definition, the entire terminal definition is
placed in the next table section. This results in a
table section with fewer rows than defined.
NOTE If the terminal definition is the first one in
the section and exceeds the number of rows per
section, the entire terminal definition is kept togeth-
er in one section.
Specifies how many table sections to insert on each
drawing. All sections are placed on new drawings
Sections Per Drawing
unless the option Insert All Sections on Active
Drawing is selected.
NOTE The Insert All Sections on Active Drawing
option is not available when using the Terminal
Strip Table Generator tool.
Specifies where to place the table in the drawing.
You can enter x and y values or pick a point on the
screen.
Section Placement
Specifies the distance between sections, offset dir-
ection, and the base point for the distance measure-
ment.
Section Offset
Distance: Specifies the distance between sec-
tions.
Direction: Specifies the direction for the offset.
Base Point: Specifies the base point for the
distance measurement between sections.
Specifies the scale and angle of the table sections
when inserted. These settings are reflected in the
preview.
Scale/Angle on Insert
Drawing Information for Table Output
First Drawing Name: Specifies a starting
drawing file location and file name to use for
the automatic creation of the drawing files. The
drawings are automatically added to the active
project and display at the end of the drawing
list in the Project Manager. The last character
1120 | Chapter 13 Terminal Tools