2011

Table Of Contents
Displays the number of drawings necessary to
generate the terminal strip using the current table
settings.
Number of Drawings
Defines the table settings on page 1093 such as
number of rows per section, number of sections
Settings
per drawing, table, and section placement, section
offset, scale, angle, first drawing name if a new
drawing is needed, and the template to use for any
new drawings generated.
Browses for any saved settings (in a *.tsl file) that
you previously created.
Browse
Saves the settings to an external file (with extension
*.tsl) that you can later reuse. The default folder
Save As
location is the User folder in the Documents and
Settings or Users location.
Uses the default settings for creating the table.Default
Insert/Rebuild/Refresh
Creates new drawings for each table or table sec-
tions based on the defined table settings and adds
the drawings to the active project.
Insert
NOTE If the selected strip is found in the project,
existing table sections are deleted and new draw-
ings are created and new tables placed.
Updates existing tables that were already placed.
If the terminal strip exists in the project, table sec-
Rebuild
tions are located, deleted, and rebuilt in place
without prompting you to select a new insertion
point.
NOTE If the selected terminal strip is not found in
the project, an alert displays asking if you want to
insert the missing strip in a new drawing. If you
click Yes, the terminal strip is inserted. If you click
No, the terminal strip is not inserted. The terminal
strips that were found are updated.
1118 | Chapter 13 Terminal Tools