2011

Table Settings
Specifies the table style to use for the table. Select
from the list or click Browse to browse to and select
Table Style
another drawing file whose table styles you want
to use.
NOTE If the selected table style is not in the
TableStyle.dwg file, it is added.
Defines the columns on page 1110 to include, order,
headings, justification, and jumper circles display
for the jumper chart.
Define Columns
Defines specific row styles to use for the selected
table style. On the Select Row Cell Styles dialog
Row Styles
box, select the table style and row cell styles to use
and click OK.
Defines the specific layer for the tabular terminal
strip to place on when inserted. On the Select Table
Layer
Layer dialog box, select the layer name from the
list of layers on the active drawing and click OK.
Defines a title for the table. Enter a title, select from
a list of variables or use a combination of both.
Table Title
When selecting from the list, the selection is added
to the end of the string if one exists in the edit box.
Displays the total number of rows needed to create
the terminal strip table layout. For example, even
Total Rows
though the terminal strip contains only 86 termin-
als, the table format may present more rows in a
multi-line terminal situation.
Displays the number of rows per section as defined
on the Table Settings dialog box.
Number of Rows per Section
Displays the number of sections needed based on
the total rows and the number of rows per section.
Number of Sections
Displays the number of sections to place on each
drawing as defined on the Table Settings dialog
box.
Number of Sections per Drawing
Generate terminal strip tables | 1117