2011

up or down in the listing or manually pick a new pos-
ition on the terminal strip listing.
Spare
Inserts spare terminal blocks on the active terminal
strip. Use the Insert Spare Terminal dialog box to
Insert Spare Terminal
define a terminal block number or name, specify the
number of spares to insert, and to insert the spare
terminals previous or below the highlighted terminal.
You can add up to 10,000 spare terminals into the
terminal block.
NOTE Spare terminal assignments are temporary for
the current session of the Terminal Strip Editor. Place
the graphical terminal strip layout on the drawing
during the current session if you want to keep the
spare terminal assignments. You are prompted to In-
sert or Rebuild the terminal strip before you can exit
Terminal Strip Editor.
Inserts one or more accessories (such as terminal end
barriers or partitions) into the terminal strip.
Insert Accessory
NOTE Accessory terminal assignments are temporary
for the current session of the Terminal Strip Editor.
Place the graphical terminal strip layout on the draw-
ing during the current session if you want to keep the
accessory terminal assignments. You are prompted to
Insert or Rebuild the terminal strip before you can exit
Terminal Strip Editor.
Deletes the spare terminal block or accessory on the
terminal strip listing.
Delete Spare Terminals/Accessories
Destinations
Toggles an entire location code from an Internal des-
tination to an External destination or from an External
Toggle Location
destination to an Internal destination. You do not have
to select any terminal blocks from the terminal listing.
1086 | Chapter 13 Terminal Tools