2011

Table Of Contents
External (right) destinations, while all External destin-
ations switch to Internal destinations.
Moves the destinations within the terminal/level
definition. All the selected destinations are moved up
Move Destination
or down within the level they belong to. Only the
destinations for cloned blocks due to wire constraints
can cross the boundary of the level they originally
belong to.
Jumpers
Jumpers together the selected terminals or levels.Assign Jumper
Edits a catalog assignment for a jumper, removes ter-
minals or levels from a jumper definition or deletes a
jumper.
Edit/Delete Jumper
Multi-Level
Combines two or more terminal blocks from any
drawing into a single multiple-level terminal block.
Associate Terminals
You are alerted if you select too many levels to associ-
ate. You can then decrease the number of selected
levels or use the Break Apart Terminal Associations
tool to separate out one of the levels in the new asso-
ciation.
Separates one or more levels from the multiple level
terminal block into separate terminal blocks. When
Break Apart Terminal Associations
the new terminal definitions are created, they retain
the same properties as the original terminal.
One terminal: Breaks the selected levels from
their original association and adds them into a
new association together.
Separate terminals: Breaks the selected levels
from their original association and adds each level
into a new individual association. These levels
occupy the same level in their new terminal
definition, and new terminals are assigned the
1082 | Chapter 13 Terminal Tools