2011

Table Of Contents
NOTE While in selection mode, you can use Pan
or Zoom to find the terminal symbol to select.
Removes the terminal being edited out of the
defined association. The properties from the original
Break Out
association and the levels of the terminal are
maintained.
Displays the Block Properties dialog box where you
can define and maintain terminal block properties.
Block Properties
NOTE It is disabled if the active drawing is not part
of the active project.
Properties/Associations
The list box displays the current status of the association of the edited terminal.
It lists all associated terminal symbols from the schematic and terminal panel
footprints. If the terminal symbol is being inserted for the first time, the list
box only displays the reference for itself. The number of levels defined in the
block properties displays at the top of the Properties/Associations group. The
terminal being edited is highlighted in the list box.
You can double-click in the list to modify the terminal association in the
Add/Modify Associations dialog box.
Lists the level description defined in the terminal
block properties. This data is entered into the
Label
LnnLABEL attribute if present; otherwise, it is placed
into xdata.
Lists the terminal numbers defined in the associ-
ation. Only one terminal number is allowed per
Number
level and each level displays its respective terminal
number or text. Panel terminal symbols do not
display terminal numbers.
Lists the pin numbers defined on the left side of the
terminal block. This data is entered into the
PinL
LnnPINL attribute if present; otherwise, it is placed
into xdata.
Insert terminals and connectors | 1043