2011

selected, an I or E displays in the PD1 or PD2
column (Point Description) of the Wire From/To
report.
Updates the wire connectivity database (the
WFRM2ALL table) with wire connection information
from any out-of-date files.
Freshen
NOTE If all drawings are up-to-date, this button is
disabled. If not, the button is enabled and the count
of out-of-date drawings displays next to the button.
Removes the wire connection sequence override
information from a wire network. It consists of
Remove All
Xdata assignments on component wire connection
attributes and optional Xdata assignments on ter-
minal symbols if any Direct-to-Terminal sequences
are defined.
NOTE If the network includes one or more IEC-
style wire “Tee” connection symbols, the sequen-
cing defined by their placement and orientation is
not affected. The result is that values may remain
in the Current column.
Applies the wire connection sequence information
in the form of Xdata to the wire connection points
OK-new
and terminals of the selected wire network. This
sequence data is then maintained inside the draw-
ing file. It is later extracted into the project scratch
database file to control the format of wire connec-
tions listed in the WFRM2ALL table.
Control from/to report connection sequencing | 1037