2011

Table Of Contents
Defines the sequence by actual picks at or very near
each wire connection point. Pick near each wire
Pick Mode
connection in the order of how you want the wiring
sequence to proceed from component to compon-
ent.
NOTE Pick Mode is unavailable when you are
working with a wire network that crosses multiple
drawing files.
Automatically sorts the wire connection display by
the installation and location values. If previously
sorted, the sort is reversed.
Sort Location
Moves the selected wire connection up one space
in the wire order list.
Move Up
Moves the selected wire connection down one
space in the wire order list.
Move Down
Lists additional sequences where a component
connection (or terminal connection) is to be repor-
ted as being directly wired to a selected terminal.
Direct-to-Terminal Secondary Sequences
Moves the selected components to the Direct-to-
Terminal Secondary Sequences list along with a
Add
copy of the selected terminal. Select the compon-
ents and terminal to sequence together for this
button to be available.
If you select multiple components to daisy-chain
to the terminal (by holding CTRL key down), the
first selected component displays ties directly to
the terminal.
(available only when an entry in the sequence is
highlighted) Removes the selected sequencing from
Reset
the Direct-to-Terminal Secondary Sequences list.
The component is moved back to the Wire Connec-
tion Sequence list.
Indicates whether the component is undefined (-),
reported on the internal side of the terminal (I) or
Connection
reported on the external side of the terminal (E). If
1036 | Chapter 12 Wire/Wire Number Tools