2011

1 Click Schematic tab ➤ Edit Wires/Wire Numbers panel ➤ ➤
Wire Sequence drop-down ➤ Show Wire Sequence.
NOTE You can also access this tool by right-clicking on any wire segment in
the wire network.
2 Press the Space bar to step through the defined wire sequence.
NOTE If the wire sequence crosses multiple drawings and you try to view the
sequence as an animation, a dialog box listing the off-drawing wire connection
information displays so that you can indicate to go to the other drawings to
continue viewing the sequence.
Insert wire tee markers
Use the tee marker tools to insert dot tee markers or angled tee markers at
existing wire tee intersections. If a tee marker is present, the tools change
existing markers from dot to angled or from angled to dot. This dot and angled
tee insertion happens automatically when you use the Insert Wire tool and
the drawing is set up (in the Drawing Properties ➤ Styles dialog box) for dots
or angled tee symbols at intersections.
You cannot insert a tee connection symbol into empty space. A valid line wire
ending (not crossing) at a tee intersection somewhere along the length of
another line wire is needed. It does not insert a tee connection symbol at a
simple 90-degree wire turn. You can right-click on any inserted tee markers
for access to editing tools such as Toggle Angled Tee Markers, Delete
Component, Scoot, or Insert Wire.
Insert dot tee markers
Inserts wire connection dots at tee intersections.
Replaces any existing angled wire connection symbol with a dot connection
symbol. To insert the dot tee markers automatically as each wire tee
intersection is created, set the default Wire Tee connection in the Wiring Style
section of the Drawing Properties: Styles dialog box.
Control from/to report connection sequencing | 1031