2011

1 Click Schematic tab ➤ Edit Wires/Wire Numbers panel ➤ Modify Wire
Numbers drop-down ➤ Hide.
2 Select a wire number or the wire it is associated to. AutoCAD Electrical
moves the wire number to a special hide layer and the number is no
longer visible on the screen.
The new hide layer is created from the wire number layer name with a
"_HIDE" suffix. For example, if the wire number text layer is called
WIRENO then the hide layer name is called "WIRENO_HIDE". The layer
is created automatically when needed and you are asked if you want to
freeze this layer.
Unhide wire numbers
1 Click Schematic tab ➤ Edit Wires/Wire Numbers panel ➤ Modify Wire
Numbers drop-down ➤ Unhide.
2 Select a wire number or the wire the hidden number is associated to.
AutoCAD Electrical moves the wire number out of the hide layer and the
number is visible on the screen.
NOTE Do not use the Hide Wire Number and Unhide Wire Number tools on in-line
wire numbers.
See also:
■
Modify/fix/unfix on page 992
Signal Arrows
Signal Arrows
AutoCAD Electrical uses a named source/destination concept. You identify a
wire network to be the source, insert a source arrow on that network, and
assign a source code name to it. On the wire network that is to be a
1010 | Chapter 12 Wire/Wire Number Tools