2011

2 Change the text size of the WIRENO attribute definition.
3 Save the drawing.
4 Open drawings "wd_wnv.dwg", "wd_wch.dwg", and "wd_wcv.dwg."
5 Repeat steps 2 and 3 for each.
NOTE You will not see these new, resized wire numbers on existing drawings
unless you erase all the wire numbers and purge the drawing of the old block
inserts.
Make wire numbers on vertical wires come in rotated 90
degrees
You can make wire numbers for vertical wires come in automatically rotated
90 degrees so the wire number lays along the wire.
1 Determine which schematic symbol library is in use and open drawing
"wd_wnv.dwg" in AutoCAD.
2 Rotate the WIRENO attribute 90 degrees using the AutoCAD Rotate
command.
3 Save the drawing.
4 Open drawing "wd_wcv.dwg."
5 Repeat steps 2 and 3.
Erase or Hide Wire Numbers
Erase or hide wire numbers
Erase or hide wire numbers
Erase a wire number
Deletes selected wire numbers.
Deletes the main wire number of a network, or a wire number copy. Select a
wire number copy precisely to erase just that copy, leaving the main wire
number of the network and any other copies in place. Select the main wire
number to delete it and all wire number copies.
1008 | Chapter 12 Wire/Wire Number Tools