2011

Table Of Contents
1 Click Schematic tab Insert Wires/Wire Numbers panel Wire
Number Leader drop-down Wire Number Leader.
2 Select the wire number text.
3 Select the new position for the wire number. Right-click or press Enter
to position the wire number.
NOTE You can type "C" at the command prompt to collapse the wire leader
back to the wire number block. You can do it immediately after inserting a
leader if you determine that you do not want the leader. Or, rerun the
command if you want to remove the leader from existing wire numbers.
Move the wire number without use of a leader
If you want to reposition the wire number without use of a leader, use the
Move Attribute utility.
1 Click Schematic tab Edit Components panel Modify Attributes
drop-down Move/Show Attribute.
2 Select the attributes to move and press Enter.
You can pick the components individually or by windowing. Each
attribute highlights with a rectangular box drawn around it.
3 Select the base and insertion points for the move. The attribute follows
your cursor and is automatically moved to the selected position.
The attributes remain tied to the parent block inserts.
998 | Chapter 12 Wire/Wire Number Tools