2011

Table Of Contents
1 Click Schematic tab Edit Wires/Wire Numbers panel Move Wire
Number.
2 Select the wire segment where you want the wire number repositioned.
It is not required that you pick on the existing wire number first.
The wire number automatically moves to the selected position.
Rotate a wire number
1 Click Schematic tab Edit Components panel Modify Attributes
drop-down Rotate Attribute.
2 Select the wire number text to rotate 90 degrees from its current
orientation.
Each click the wire number text rotates it another 90 degrees
counter-clockwise.
Reposition the wire number text with an attached leader
Inserts, modifies, or collapses a leader on a selected wire number.
Pick directly on the wire number text, and then identify the new position.
Right click or press Enter to exit the command.
Reposition Wire Numbers | 997