2011

Table Of Contents
Click Setup to display the Import Wire Types on page 903 dialog box where
you:
Select the wire types to import.
Define whether to overwrite any Wire Numbering and USERn differences
for existing wire types.
Define whether to overwrite color and linetype differences for existing
wire layers.
Reposition Wire Numbers
Reposition wire numbers
Scoot wire numbers
If you want to move a wire number along its wire segment, use Scoot and pick
right on the wire number.
1 Click Schematic tab Edit Components panel Modify Components
drop-down Scoot.
2 Select the wire number to slide along its connected wires or select the
wire segment itself to scoot the entire wire, including the components,
along the bus. You can scoot an entire rung up or down. A rectangle
drawn in temporary graphics indicates the selected items.
3 Move your cursor to the appropriate position and click your mouse
button.
The items scoot and reconnect.
Move a wire number
Moves an existing wire number to a selected location on the same wire
network.
Select a location on the wire segment to define a new position for the wire
number.
996 | Chapter 12 Wire/Wire Number Tools