2011

Table Of Contents
Wire Numbers
Select to keep wire numbers the same, erase specified wire numbers, reset
specified wire numbers, or set wire numbers to fixed or normal.
Signal Arrow Cross-reference text
Select to maintain the signal arrow cross-reference text or to remove all signal
arrow cross-reference text across the current project.
Parent Component Tags: Fix/Unfix
Select to maintain the component tags or to set all parent component tags to
fixed or normal across the current project.
Item Numbers: Fix/Unfix
Select to maintain the item numbers or to set all item numbers to fixed or
normal across the current project. If you run
Resequence Item Numbers on
page 1602 later on, fixed item numbers do not change.
Change Attribute
Click Setup to select the attributes to change, and then
enter the height and width definitions for the selected at-
tributes.
Change Attribute Size
NOTE If you do not want the attribute height or width to
change, do not enter a value definition.
Click Setup to select a text font to apply to the text style
used on component attributes.
Change Style
For each drawing
Enter the name or browse to a command script file to use for each drawing
in the current project or to purge all blocks.
Wire Types
Imports wire types defined on another drawing or drawing template. Enter
the drawing or template name or browse to it using the browse button. The
program reads the specified drawing and extracts all wire type information.
Fix Wire Numbering | 995