2011

1 Click Schematic tab ➤ Edit Wires/Wire Numbers panel ➤ Modify Wire
Numbers drop-down ➤ Edit Wire Number.
2 Select a wire or select an existing wire number. If a wire number exists,
the Modify/Fix/Unfix dialog box displays. However, if a wire number
does not exist on the selected wire, the Insert Wire Number dialog box
displays.
NOTE If the selected wire is on a layer defined as No Wire Numbering, the
Insert Wire Number dialog box does not display. An alert displays indicating
that the layer is set as No Wire Numbering.
3 Edit the wire number or enter a new wire number. If you are inserting a
wire number, use the arrows or click Pick to select the appropriate wire
number. Pick speeds up the task if you have some special wire numbers
to edit manually.
4 Select to make the wire number visible or hidden.
5 To fix the wire number, select Fixed and click OK. If the wire number is
already fixed and you want to turn it back into a regular wire number,
clear the check box and click OK.
Fix all wire numbers
There are times when you want to fix all or many wire numbers on a drawing
at their current values. Use the Fix Wire Numbers tool and identify all the
wiring you want AutoCAD Electrical to mark as fixed.
If you run a wire number retag later on, fixed wire numbers do not change.
Fix Wire Numbering | 991