2008

“(??)” is also included in the list if AutoCAD Electrical found any component
or stand-alone terminals that didn’t have an assigned location code.
Access:
Click the Schematic Reports tool. Select Wire From/To from the report list.
Specify whether to process the project, active drawing, or selected wires.
From the Projects menu, select Reports ➤ Schematic Reports. Select Wire
From/To from the report list. Specify whether to process the project, active
drawing, or selected wires.
Select location codes from the left and right-hand lists to build the the report’ s
from/to combinations shown in the middle of the dialog box. Click OK to
display the report. AutoCAD Electrical quickly filters and formats the extracted
data and presents it in the Report Generator dialog box. You can then save it
to a text report file, a comma-delimited file to import into a spreadsheet or
database program, or insert it on to a drawing in table format.
Displays the “from” (left-hand list) and “to” location
codes (right-hand list) found on the drawing(s).
Location codes
Clicking a location code moves the selected code
from these lists to the Report From/To list in the
center of the dialog box.
Displays the combination of location codes you
selected from the Location Code lists. This is used
to generate the Wire From/To report.
Report From/To
Buttons
■ All >> or All <<: Adds or removes all of the loc-
ation codes from the Report From/To list de-
pending on which side of the dialog box the
button is located.
■ << or> > : Removes the selected location code
from the Report From/To list.
Displays the Select Multiple From/To Location
Combinations for Report dialog box. Each location
Multiple Combinations
code in the “From” side is linked to each location
code in the “To” side of the report. For example,
if you select MACHINE (from) and FLOOR (to) in
922 | Chapter 14 Reports