2008

Location Codes to Extract
Extracts only the information for components with specific location values.
Indicate to process all components that carry part number values, components
without a location code, or only components marked with a location code
that matches that entered in the edit box. For example, BOM report for
components marked "OP STA 2." Wild cards are supported.
After you click Named Location, type the location code in the box, or click
List: Drawing or List: Project to select from a list of used location codes. You
can also create a report from multiple location codes. AutoCAD Electrical
automatically creates a comma-delimited list for the named location search.
Freshen Project Database
Specifies for AutoCAD Electrical to update the project database to include any
out-of-date drawing files.
Format
Changes the format of the extracted data. The dialog box lists the format files
to select from.
Schematic wire label
This report lists wire markers/labels and can be used to create physical wire
or cable labels.
Access:
Click the Schematic Reports tool. Select Wire Label from the report list.
From the Projects menu, select Reports ➤ Schematic Reports. Select Wire Label
from the report list.
Specify whether to process the project, the active drawing, or selected wires.
NOTE If you select Active drawing (pick), you must click, the wire rather than the
wire number.
Installation Codes to Extract
Extracts only the information for components with specific installation values.
Indicate to process all components that carry part number values, components
920 | Chapter 14 Reports