2008

Changes what data fields are reported and the order in which they appear.
Access:
Click the Schematic Reports tool. Select Wire Label from the report list. Run the
report and click Wire Label on the Report Generator dialog box.
Click Projects ➤ Reports ➤ Schematic Reports. Select Wire Label from the
report list. Run the report and click Wire Label on the Report Generator dialog
box.
Lists the available fields for formatting the report (including
user-defined attributes). Select a field from the list to
transfer it into the Fields to Report list.
Available Fields
Lists the fields to display in the report.Fields to Report
Removes the selected field or all fields from the Fields to
Report list.
Remove/Remove All
Moves the selected field up one spot in the Fields to Report
list.
Move Up
Moves the selected field down one spot in the Fields to
Report list.
Move Down
Specifies the special character to separate the selected fields.
Enter a special character to separate the selected fields in-
Separator
side the list box. Do this by selecting a field from the Fields
to Report list, define the separator, select another field,
define a separator, and so on. You can also select the sep-
arator from a list.
The "\n" symbol stands for the new line. When you use
this as separator, the field displays in the new (next) line.
Available Fields
Wire numberWIRENO
Generate reports | 891