2008

Specifies the Y-distance from the end of one table section to the
beginning of the next. The sections are on the same drawing.
Y-Distance
Optional script file reference
This provides the option to save the report file to a script file. You can set up
this script file to automatically know the file name of the report you just
created. For AutoCAD 2000 and later, the report's file name can be retrieved
using the AutoLISP expression (v1-bb-ref 'FNAM).
Access:
Click the Save to File button on a report dialog box (such as Schematic Bill of
Materials). Select the report type and click OK; then select the file to save and
click Save.
The file location and name for your report is displayed at the top of the dialog
box.
Passes the report file to a script file. This provides
a link to post-processing the data or automatically
passing it on to another application.
Run Script
Closes the dialog box without creating a script file.Close - no script
Script file options reference
Displays if the report file was created and saved. The report filename and
location are displayed in the title bar of the dialog box. You can execute a
script file and passes the report filename to it. The filename is carried in an
AutoLISP variable called FNAM.
Access:
Click the Save to File button on a report dialog box (such as Drawing Extract
for all locations). Select the report type and click OK; then select the file to save
and click Save. In the Optional Script File dialog box, select Run Script.
Prints the default script file.Print
810 | Chapter 14 Reports