2008

Change drawing display options
You can use the Drawing List Display Configuration tool to change the way
your drawings are listed in the Project Manager. By default drawings are
identified by the drawing file name in the Project Drawing List.
1 On the Project Manager, click the Drawing List Display Con-
figuration tool.
2 Determine which display options to show in the drawing list.
Options include:
■ Installation Code (%I)
■ Location Code (%L)
■ Section
■ Sub Section
■ Sheet Number (%S)
■ Drawing Number (%D)
■ Drawing Description 1-3
■ File Name
3 Select the display option from the Display Options list and
click the >> button or add all of the options by clicking the
All >> button.
The display option you selected moves to the Current Display
Order list. To rearrange this list, select an option and click
Move Up or Move Down. To remove an option from the list,
select the option and click the << button.
4 (Optional) Change the character to use between the values in
the listing. The default separator value is a dash (-).
5 (Optional) Change the way the selection highlights in the
listing depending on whether the Project Manager is active or
not. By default the drawing file you select in the drawing list
is highlighted at all times; you can select to only highlight
your selection when the Project Manager drawing list is active.
6 Click OK.
The Project Drawing List automatically updates in the Project
68 | Chapter 2 Project Management