2008

TIP To determine which *.dat file is active, in the Project Properties dialog box,
Project Settings tab, Library and Icon Menu Paths section, expand the Schematic
Icon Menu File option. This is the schematic icon menu file listed in the *.wdp file.
Icon Details
Defines the icon name and image.
Displays an image preview of the specified image
file.
Preview
Specifies the name to appear in the icon, the descrip-
tion text and the tool tip for the icon.
Name
Specifies the image file to use for the new icon. You
can enter the image file name (or complete path) or
select it using one of the following methods:
Image file
■ Browse: Finds an existing image to use for the
icon. You can browse for .sld or .png images.
■ Pick: Selects an existing block name on the cur-
rent drawing to use as the image file name. For
example, if you select block HPB11, the image
file name edit box displays “HPB11.”
■ Active: (This is unavailable if the drawing is a new
drawing and has not been saved) Selects the
active drawing name to use as the Image file.
For example, if the active drawing name is
“demo005,” then the image file edit box has
“demo005” listed as the file name.
The browsed image is copied to the Images folder
and saved as a relative path in the .dat file. However,
you can enclose the image path in quotation marks
if you do not want the image copied to the Images
folder and to save the complete path instead of the
relative path in the .dat file. The entered image file
name can be names like "PB1" or "CONTROL RELAY,"
file names with an extension such as “pb1.png,” or
it can follow the syntax {slide_library or dll file (slide
or .png)}. For example, "S2(pb)" or "S7(control_re-
lay)."
Overview of the Icon Menu Wizard | 737