2008

Insert splices
The splice symbol is an in-line connection symbol allowing one or more wires
to connect at each end. The default splice symbol is set up to trigger a wire
number change through the symbol.
1 Click the arrow on the Insert Connector tool to access the In-
sert Splice tool.
2 Click the Insert Splice tool.
The Splice Symbols dialog box displays.
3 Select the splice to insert from the icon menu, enter the splice
name in the Type it box, or click Browse to browse to and select
the symbol from another location.
4 Click OK.
5 Pick the insertion point on the drawing. Place the symbol on
an existing wire, causing the symbol to break the wire or place
it in empty space (where you can later draw a wire through
the symbol or connect one or more wires to each end of it).
The Insert/Edit Component dialog box displays.
6 Assign the catalog information, description, and other inform-
ation as required.
7 Click OK.
Insert splices | 685